Here is all you need to start building your Pedal Pi:
- Guide How to build Pedal-Pi in 4 Steps.
- How to Start Programming Pedal-Pi.
- Pedal-Pi Schematic.
- Pedal-Pi Forum.
- Pedal-Pi Flickr with hi-res images.
- Main Article.
A very usefull image (click to enlarge):
PedalPi Bill Of Materials:
The components are easy-to-find through-hole parts with the minimum number of references:
Pedal-Pi Bill of Materials. | ||||
Reference | Qty | Value | Description | Mouser Reference |
Capacitors | ||||
C2,C4, C6, C7, C8 | 5 | 6.8nF | ceramic cap | SR211C682MARTR1 |
C1, C10, C15 | 3 | 100nF | ceramic cap | SR211C104KARTR1 |
C3, C9, C16 |
3 | 4.7uF | electrolytic cap | ECE-A1EKA4R7 |
C5 | 1 | 270pF | ceramic cap | K271J15C0GF5TL2 |
C11, C12, C13, C14 | 4 | 220uF | electrolytic cap | REA221M1CBK-0811P |
Resistors | ||||
R0, R1 |
2 | 1MΩ | Resistor, 1%,1/4W | MFR-25FRF52-1K |
R2, R3, R6, R9, R10, R15 |
6 | 4.7KΩ | Resistor, 1%,1/4W | MFR-25FRF52-4K7 |
R4, R11 |
2 | 100KΩ | Resistor, 1%,1/4W | MFR-25FRF52-100K |
R7 | 1 | 301KΩ |
Resistor, 1%,1/4W | MFR-25FRF52-301K |
R12 | 1 | 50KΩ | Resistor, 1%,1/4W | MFR-25FRF52-49K9 |
R13, R14 | 2 | 300Ω | Resistor, 1%,1/4W | MFR-25FRF52-300R |
Others | ||||
RV1 | 1 | 500K | resistor trimmer | 3319W-1-504 |
D3 | 1 | Led 3mm blue | blue led 3mm | SSL-LX3044USBC |
U1 | 1 | MCP6002 |
op-amp rail-to-rail, pdip8 |
MCP6002 |
U2 | 1 | MCP3202 | 12bit ADC, p-dip8 | MCP3202 |
IC Socket | 2 | dip 8 socket | socket dor dip8 | 1-2199298-2 |
SW1 | 1 | 3DPT footswitch | 3PDT footswitch | 107-SF17020F-32-21RL |
SW4 | 1 | Toggle switch | SPDT toggle switch | 612-100-A1111 |
SW2, SW3 | 2 | Pushbutton | off-on pushbutton | Farnell (R13-24A-05-BB) |
Conn1 | 1 | 40 pin header |
2.54 pitch pin header | |
J1, J2 | 2 | 1/4 Jack audio | stereo 6.35mm jack | NMJ6HCD2 |
PCB + Cover + Screws |
||||
Pedal Pi PCB | 1 | electrosmash store | ||
Acrylic Cover | 1 | electrosmash store | ||
M2.5x25 + 6 nuts | 8 | hardware stores/eBay |
And remember that you can always contact us.