Welcome, Guest
Username: Password: Remember me

TOPIC: Beginner Question About Initializing Pedal Pi

Beginner Question About Initializing Pedal Pi 2 weeks 2 days ago #1661

  • PatRad
  • PatRad's Avatar
  • OFFLINE
  • New Member
  • Posts: 2
  • Karma: 0
Hey all, first post here and BRAND new to raspberry pi and making effects, so apologies ahead of time for how much of a novice question this is.

If I want to run an effect/program on my pedal, what are the exact steps? Do I simply just do a sudo nano filename fikename.c, sudo gcc - o ./filename - l bcm2385, then simply load the pi into the pedal after that. Or rather, does the pi need to be in the pedal pi when the function compiles? I can’t find anything on this subject and although I know I could probably figure it out on my own, I want to know if I’m missing something.

Thanks!

Pat
The administrator has disabled public write access.

Beginner Question About Initializing Pedal Pi 2 weeks 1 day ago #1662

  • PatRad
  • PatRad's Avatar
  • OFFLINE
  • New Member
  • Posts: 2
  • Karma: 0
Nvm, saw in a video it needs to be plugged in to the computer and you just run it from there. Sweetness
The administrator has disabled public write access.

Beginner Question About Initializing Pedal Pi 2 weeks 16 hours ago #1665

  • Ray
  • Ray's Avatar
  • NOW ONLINE
  • Moderator
  • Posts: 563
  • Thank you received: 125
  • Karma: 27
Have a look at this:

www.electrosmash.com/forum/pedal-pi/230-...ile-any-code?lang=en
www.electrosmash.com/forum/pedal-pi/260-...ust-powering-pi-zero
www.electrosmash.com/forum/pedal-pi/202-...ing-pedal-pi?lang=en

Vim editor is pretty hard to use, I suggest you use nano.
If you have any question, please let me know.
The administrator has disabled public write access.
Time to create page: 0.095 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio