1. Forum
  3. Electro Smash Forum
  5. Pedal-Pi
  7. How to Start Programming Pedal-Pi

How to Start Programming Pedal-Pi

7 años 1 semana antes - 6 años 8 meses antes #834 por Ray
How to Start Programming Pedal-Pi Publicado por Ray

Rendering Error in layout Message/Item: array_keys(): Argument #1 ($array) must be of type array, null given. Please enable debug mode for more information.

Por favor, Identificarse para unirse a la conversación.

4 años 5 meses antes #2015 por deadbird
Respuesta de deadbird sobre el tema How to Start Programming Pedal-Pi
Hi Ray,
I'm currently in the debug phase of building my pedal pi, i've decided to install the jessie light OS with the pedal pi codes in built but the link you have provided doesn't contain an .img file rather it seems to be a "file" type format. I have attached the properties of the file.
Thank you.
Adjuntos:

Por favor, Identificarse para unirse a la conversación.

4 años 5 meses antes #2016 por deadbird
Respuesta de deadbird sobre el tema How to Start Programming Pedal-Pi
hey, i've done some further digging and found out that the .img file is okay but i'm not able to update the OS hence cant access the pi.
kindly provide me guidelines on what to do after writing the OS onto the SD card.

Por favor, Identificarse para unirse a la conversación.

4 años 5 meses antes #2018 por Ray
Respuesta de Ray sobre el tema How to Start Programming Pedal-Pi
Once you have installed the OS into the SD card, you can access the pi either using a mouse/keybord/screen or on "headless mode".
I usually use a keybord/mouse/screen to configure wifi, etc and then just use it in headless mode from my laptop, so you can load different effects, etc.

Have a look at this:
www.electrosmash.com/forum/pedal-pi/260-...ust-powering-pi-zero

Por favor, Identificarse para unirse a la conversación.

  1. Forum
  3. Electro Smash Forum
  5. Pedal-Pi
  7. How to Start Programming Pedal-Pi
Tiempo de carga de la página: 0.058 segundos