Welcome, Guest
Username: Password: Remember me

TOPIC: Swap jacks side to side

Swap jacks side to side 7 years 10 months ago #162

  • ltlfrari
  • ltlfrari's Avatar
  • OFFLINE
  • New Member
  • Posts: 1
  • Karma: 0
I am no pedal expert but most pedals seem to have (with the stomp button on the bottom nearest to you) the input on the right and the output on the left and are connected together right to left in a chain.
It looks like this kit has them the other way around.
Any easy way to swap them over so the pedal can easily go into a pedal chain?
The administrator has disabled public write access.

Swap jacks side to side 7 years 10 months ago #164

  • JR
  • JR's Avatar
  • OFFLINE
  • Senior Member
  • Posts: 77
  • Thank you received: 31
  • Karma: 6
Hi,
I am aware that the in/out jacks in pedalSHIELD (in left - out right) are not placed in the most common arrangement.
The reason of that placement was because I was inspired by my Line 6 Pocket Pod during the design process. Sorry for the inconvenience but the only way to put the connectors as other stompboxes is doing the nasty job of cutting lines and placing wires....

killerantppexpress.jpg
keep it simple
Last Edit: 7 years 8 months ago by JR.
The administrator has disabled public write access.
Time to create page: 0.096 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio