Welcome, Guest
Username: Password: Remember me

TOPIC: 3D printed plastic cover

3D printed plastic cover 5 years 10 months ago #36

  • gamoesp
  • gamoesp's Avatar
  • OFFLINE
  • New Member
  • Posts: 6
  • Thank you received: 7
  • Karma: 3
As somebody asked, here you can find the STL file of the 3D printed covers included with the kits.
This is the one with the logo "pedalSHIELD" on top of it...

Get it from Thingiverse.

We use ABS plastic with a 0.25 nozzle, but we've used the same STL file to print the cover with PLA plastic or with a 0.4 nozzle and it works fine as well.

Soon we will publish the design with the ElectroSmash thunder, meanwhile any suggestion or new design will be really welcomed! ;)
Last Edit: 5 years 10 months ago by gamoesp.
The administrator has disabled public write access.

3D printed plastic cover 5 years 10 months ago #41

  • Yetzederixx
  • Yetzederixx's Avatar
  • OFFLINE
  • Junior Member
  • Posts: 21
  • Thank you received: 3
  • Karma: 0
I'm probably going to make one out of wood since I have a garage full of tools and a wife always going on about using them for something. :evil:
The administrator has disabled public write access.

pedalSHIELD Header Pin and spacer height 5 years 7 months ago #96

  • kalbertsen
  • kalbertsen's Avatar
  • OFFLINE
  • New Member
  • Posts: 3
  • Thank you received: 1
  • Karma: 0
Has anyone modeled or scanned the pedalshield? I would like to 3D print a case for it.
The administrator has disabled public write access.

3D printed plastic cover 5 years 7 months ago #97

  • JR
  • JR's Avatar
  • OFFLINE
  • Senior Member
  • Posts: 77
  • Thank you received: 31
  • Karma: 6
Hi Kalbertsen, I have moved your question here which seems to fit better.
So far we released the 3D printed cover native files but we did not print a full enclosure. It is a good idea though.
keep it simple
The administrator has disabled public write access.

3D printed plastic cover 5 years 7 months ago #98

  • kalbertsen
  • kalbertsen's Avatar
  • OFFLINE
  • New Member
  • Posts: 3
  • Thank you received: 1
  • Karma: 0
I've got one modeled up now, but I haven't been able to print it yet. I'm still working on getting my Form1 printing reliably. I'll submit a picture once I get it put together.
The administrator has disabled public write access.
The following user(s) said Thank You: JR

3D printed plastic cover 2 years 7 months ago #774

  • Ray
  • Ray's Avatar
  • OFFLINE
  • Moderator
  • Posts: 692
  • Thank you received: 146
  • Karma: 41
I copy/paste this here so it would help to somebody in the future:

Well @Ray,

The truth is that I finally dared to make my first 3D design and I already have it done and pending 3D printing in ABS. I hope I have taken the measures well, and it will serve me as an experience.

I leave here the link in case you want to see it. It is very simple and austere, although I hope it will do its job well.

https://www.thingiverse.com/thing:2203506

Captura.png
The administrator has disabled public write access.

3D printed plastic cover 2 years 7 months ago #784

  • gmarti
  • gmarti's Avatar
  • OFFLINE
  • Junior Member
  • Posts: 25
  • Thank you received: 10
  • Karma: 4
Hi all,

here is a new version with some adjustments that improve the enclosure.

www.thingiverse.com/thing:2219858


pedalshield11.2_2017-04-01.png


-edited- More info and images of this design in: www.electrosmash.com/forum/hardware-peda...f-my-pedalshield-due
Last Edit: 2 years 7 months ago by Ray.
The administrator has disabled public write access.
The following user(s) said Thank You: Ray, BowDown
Time to create page: 0.238 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio