Hi Craven, we publish the schematics and PCB layout images so everybody can troubleshoot and understand the design.
We also include the PCB transfer files in case you want to try to do the PCBs DIY at home.
The gerbers and production files are not included as pedal-pi is an Open-Hardware project but the license is CC-By-Non Commercial.
Por favor, Identificarse para unirse a la conversación.
I understand that you don't want to make it too easy for someone to mass produce the PCB to make a profit, but that's what the CC-By-Non Commercial license is for.
Recreating the board from the files you've provided will take maybe a few hours, time that someone who wants to make a profit will gladly spend on it. However, for the people who do want to play by the rules, this might not be the case.
You claim this project is open hardware, but based on your response I have to disagree. I have a feeling that you would not appreciate it if someone would post the files for a modified version (different components, smd version, etc), isn't that what open hardware is about? What if someone can't source a certain part, or wants to use different switches, thus needing a sightly edited layout? For other people, such as myself, the board files are needed because I use a CNC mill to make PCBs.
You claim that everything is provided in
this
topic:
The complete project is Open Source Hardware, the design was done using KiCad, a open-source and free of charge ECAD tool. All the project files, schematics and bill of materials are public.
But clearly this is not the case.
I do not have any problems with you not wanting to share all the details, I understand that completely, but then you shouldn't call it open hardware IMO.
I just checked the CC page that is linked at the bottom of this site, and it states:
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
So I could create a board file and post it (with the proper attribution) here or wherever I want, and it would be completely legal. I really don't see any reason why you would not share the official files, that way you keep at least some control over it.
The term usually means that information about the hardware is easily discerned so that others can make it - coupling it closely to the maker movement.[1] Hardware design (i.e. mechanical drawings, schematics, bills of material, PCB layout data, HDL source code[2] and integrated circuit layout data), in addition to the software that drives the hardware, are all released under free/libre terms.
So we give support, publish BOMs, schematics, analysis, PCB transfers, all the software and codes needed so it is "easily discerned so that others can make it". If you believe that we are not Open Hardware we then disagree.
Anyway all this open source movement is about disagree with each other, different points of views and constructive design, so I am happy to see that we disagree
Por favor, Identificarse para unirse a la conversación.
Hi,
I assembled my first pedal and noticed that, when i drilled larger (for M3 screws) those holes end of IDC connector, those tracks might get exposed.
Could those track redesigned?
Por favor, Identificarse para unirse a la conversación.
Hi Mosse,
The holes at both sides of the IDC connector are M2.5 (not M3), the same size as on the pi zero board. If you have problems with the screws the best solution is to use plastic washers.
Thanks for letting us know this issue, I will bear it iin mind for next time that we produce them.
Por favor, Identificarse para unirse a la conversación.
I am trying to assemble a pedal according to the schemes in PDF files. Can someone show the location of parts on these schemes or attach photos of the assembled pedal according to these schemes?
Por favor, Identificarse para unirse a la conversación.
