- Mensajes: 6
- Gracias recibidas: 7
3D printed plastic cover
11 años 8 meses antes - 11 años 8 meses antes #36
por gamoesp
3D printed plastic cover Publicado por gamoesp
As somebody asked, here you can find the STL file of the 3D printed covers included with the kits.
This is the one with the logo "pedalSHIELD" on top of it...
Get it from Thingiverse .
We use ABS plastic with a 0.25 nozzle, but we've used the same STL file to print the cover with PLA plastic or with a 0.4 nozzle and it works fine as well.
Soon we will publish the design with the ElectroSmash thunder, meanwhile any suggestion or new design will be really welcomed!
This is the one with the logo "pedalSHIELD" on top of it...
Get it from Thingiverse .
We use ABS plastic with a 0.25 nozzle, but we've used the same STL file to print the cover with PLA plastic or with a 0.4 nozzle and it works fine as well.
Soon we will publish the design with the ElectroSmash thunder, meanwhile any suggestion or new design will be really welcomed!
Por favor, Identificarse para unirse a la conversación.
11 años 8 meses antes #41
por Yetzederixx
Respuesta de Yetzederixx sobre el tema 3D printed plastic cover
I'm probably going to make one out of wood since I have a garage full of tools and a wife always going on about using them for something. 
Por favor, Identificarse para unirse a la conversación.
8 años 5 meses antes #774
por Ray
Respuesta de Ray sobre el tema 3D printed plastic cover
I copy/paste this here so it would help to somebody in the future:
Well @Ray,
The truth is that I finally dared to make my first 3D design and I already have it done and pending 3D printing in ABS. I hope I have taken the measures well, and it will serve me as an experience.
I leave here the link in case you want to see it. It is very simple and austere, although I hope it will do its job well.
www.thingiverse.com/thing:2203506
Well @Ray,
The truth is that I finally dared to make my first 3D design and I already have it done and pending 3D printing in ABS. I hope I have taken the measures well, and it will serve me as an experience.
I leave here the link in case you want to see it. It is very simple and austere, although I hope it will do its job well.
www.thingiverse.com/thing:2203506
Por favor, Identificarse para unirse a la conversación.
8 años 5 meses antes - 8 años 5 meses antes #784
por gmarti
Respuesta de gmarti sobre el tema 3D printed plastic cover
Hi all,
here is a new version with some adjustments that improve the enclosure.
www.thingiverse.com/thing:2219858
-edited- More info and images of this design in: www.electrosmash.com/forum/hardware-peda...f-my-pedalshield-due
here is a new version with some adjustments that improve the enclosure.
www.thingiverse.com/thing:2219858
-edited- More info and images of this design in: www.electrosmash.com/forum/hardware-peda...f-my-pedalshield-due
Por favor, Identificarse para unirse a la conversación.
Tiempo de carga de la página: 0.139 segundos