Hi, thanks for contributing to the project, so far nobody did a strip board version of pedalSHIELD so I cannot compare it against anything.
Having a quick look seems to be alright.
Keep us updated with your progress!
Por favor, Identificarse para unirse a la conversación.
Hi thanks if it works it could be used for duo and any other arduino board as its not dependent on the shape of the board just use jumper cables to attach it to relivent pins also good for dev as adding in extra pots buttons lcds or switches becomes easier put it in a large box with a second duo or uno to do double independent pedals i'm testing on the uno then will spring for a duo board and let you know the results.
noticed some mistakes do not use this diagram to build it won't work i'm ging to delete it so not one makes the mistake if making it i will correct it an update this post
Por favor, Identificarse para unirse a la conversación.
looks nice...I just completed most of mine on a breadboard...need to hook up all the outputs and inputs yet... Just having a slight issue understanding the schematic view for the 3 electrolytic caps. I know which side is ground on the cap, but the schematic is very unclear. I plan to add DFRobots Lcd Button shield to my project using DSPAudios idea for the code to have multiple effects...Trying to use an uno but may have to change out to a mega or Duo
Adjuntos:
Por favor, Identificarse para unirse a la conversación.
Ok.. So here is a quick schematic I put together last night...Not the best but it does lay in all the connections and no i know the caps are the right way...
Cap orientation is much more clear than the version you used.
hope this helps others.
Adjuntos:
Última Edición: 6 años 3 meses antes por alessiow. Razón: forgot cap info
