Forum
Electro Smash Forum
pedalSHIELD DUE
Hardware pedalSHIELD DUE
Just finished build of my PedalShield DUE
Just finished build of my PedalShield DUE
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 1 mes antes #761
por gmarti
Hello everyone,
After 2 weeks looking for time, I have finally finished mounting my pedalShield.
I leave here some photos. Now let's go through the programming phase and look for some kind of enclosure to make it look nicer.
El siguiente usuario dijo gracias:
Ray
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 702
Gracias recibidas: 152
7 años 1 mes antes - 7 años 1 mes antes #767
por Ray
Fantastic photos, good job!
If you find any cool DIY case post it here!
Última Edición: 7 años 1 mes antes por
Ray .
El siguiente usuario dijo gracias:
gmarti
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 1 mes antes #769
por gmarti
Well @Ray,
The truth is that I finally dared to make my first 3D design and I already have it done and pending 3D printing in ABS. I hope I have taken the measures well, and it will serve me as an experience.
I leave here the link in case you want to see it. It is very simple and austere, although I hope it will do its job well.
www.thingiverse.com/thing:2203506
El siguiente usuario dijo gracias:
Ray
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 702
Gracias recibidas: 152
7 años 1 mes antes #775
por Ray
Thanks for your contribution!!!
El siguiente usuario dijo gracias:
gmarti
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 4 semanas antes - 7 años 4 semanas antes #778
por gmarti
Good morning.
I have my first 3D impression here for the enclosure.
I have to file some dots to gain 2mm for the USB connector, I tweak a bit for the top cap of the methacrylate cap, but I think I've tuned it pretty well. I leave you some photos.
Última Edición: 7 años 4 semanas antes por
gmarti .
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 4 semanas antes #779
por gmarti
Almost finished, in the absence of small details.
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 702
Gracias recibidas: 152
7 años 4 semanas antes - 7 años 4 semanas antes #780
por Ray
WOW thats an amazing enclosure! I love the way the blue led shines along the border.
Congrats and keep up the good job
Última Edición: 7 años 4 semanas antes por
Ray .
El siguiente usuario dijo gracias:
gmarti
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 3 semanas antes #783
por gmarti
Thank you very much. But, well, I had to do some touch-ups by hand with the help of my Dremmel.
To be able to enter properly the slanted plate touched a bit so I have lowered a millimeter an inner part of the box.
I also lowered the opening where the USB port is connected for programming because the connector did not fit well when touching down.
The connection hole of the output jack also had to be retouched. I did not notice that this connector is a millimeter displaced compared to the input.
And finally I made a hole to access the trimmer VR1 because I also did not take into account in the original design.
So I've updated my design on Tinkercad and Thingverse in case it is useful to someone.
www.tinkercad.com/things/cUx6sfmqBcI-pedalshield-case-11
www.thingiverse.com/thing:2219858
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 702
Gracias recibidas: 152
7 años 3 semanas antes #789
por Ray
I love the way the blue led illuminates the top plate with your design, neat job!
Por favor, Identificarse para unirse a la conversación.
Menos
Más
Mensajes: 25
Gracias recibidas: 10
7 años 3 semanas antes #792
por gmarti
Thank you.
I am delighted to contribute to this project.
El siguiente usuario dijo gracias:
Ray
Por favor, Identificarse para unirse a la conversación.
Forum
Electro Smash Forum
pedalSHIELD DUE
Hardware pedalSHIELD DUE
Just finished build of my PedalShield DUE
Tiempo de carga de la página: 0.178 segundos