Arduino Guitar Pedals – ElectroSmash Shop https://www.electrosmash.com/shop we are MAD about guitar pedals Wed, 16 Oct 2019 07:59:27 +0000 en-US hourly 1 https://www.electrosmash.com/shop/wp-content/uploads/2018/11/cropped-electrosmash-favicon-32x32.png Arduino Guitar Pedals – ElectroSmash Shop https://www.electrosmash.com/shop 32 32 Arduino Audio Meter – Guitar Pedal PCB https://www.electrosmash.com/shop/product/arduino-audio-meter-guitar-pedal-pcb/ Tue, 16 Jul 2019 08:43:43 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=1679
  • The PCB is 110x85mm and made of high-quality FR4 (1.6mm thickness).
  • It has 2 copper layers with black silkscreen and soldermask with plated holes for easy soldering on both sides.
  • Check the Downloads & Links tab for extra information.
    • ]]>     The Arduino Audio Meter is a programmable guitar pedal that works with the Arduino UNO board. It is able to read the incoming audio signal and create effects on the four 8×8 LED matrices. The project is Open Source and aimed for hackers, musicians and programmers that want to learn about DSP (digital signal processing), LEDs, guitar effects, and experiment without deep knowledge on electronics or programming.

    Arduino Audio Meter Specifications:

    • Based on Arduino UNO board for signal processing (16MHz, 1KB RAM).
    • Analog input/output stages using MCP6002 rail to rail op-amp.a
    • The original audio signal passes though the pedal without suffering any modification.
      Interface:

      • 1 Gain knob (amplifies the guitar signal that goes into the arduino for better resolution)
      • 1 Encoder knob + Push-Button (programmable by the user)
      • 4 LED matrix 8×8 (driven by four MAX7219)
    • Connectors:
      • Input Guitar Jack, 1/4 inch unbalanced mono, Zin=1MΩ.
      • Output Guitar Jack, 1/4 inch unbalanced mono, Zout=0.1Ω.
    • Power supply:
      • Any supply from 9 to 12V. Standard 9V Boss connector works (center tip negative, the pedal takes 600mA)

     

    Arduino Audio Meter Review by BlitzCityDIY:

    Have a look to the Blitz City DIY review on the pedal:

     

    All the info at www.electrosmash.com/time-manipulator
    You can always contact us at info@electrosmash.com

    ]]>         Arduino Audio Meter – Guitar Pedal Kit https://www.electrosmash.com/shop/product/arduino-audio-meter-guitar-pedal-kit/ Tue, 16 Jul 2019 08:32:24 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=1678
  • High-quality PCB with plated pads.
  • The complete Bill of Materials.
  • Laser cut acrylic cover.
  • Drilled Hammond 1590BBS enclosure.
  • Not included: Arduino UNO board and tools like solder iron, pliers, USB cable, etc.
  • Check the Downloads & Links tab for extra information.
    • ]]>     The Arduino Audio Meter is a programmable guitar pedal that works with the Arduino UNO board. It is able to read the incoming audio signal and create effects on the four 8×8 LED matrices. The project is Open Source and aimed for hackers, musicians and programmers that want to learn about DSP (digital signal processing), LEDs, guitar effects, and experiment without deep knowledge on electronics or programming.

    Arduino Audio Meter Specifications:

    • Based on Arduino UNO board for signal processing (16MHz, 1KB RAM).
    • Analog input/output stages using MCP6002 rail to rail op-amp.a
    • The original audio signal passes though the pedal without suffering any modification.
      Interface:

      • 1 Gain knob (amplifies the guitar signal that goes into the arduino for better resolution)
      • 1 Encoder knob + Push-Button (programmable by the user)
      • 4 LED matrix 8×8 (driven by four MAX7219)
    • Connectors:
      • Input Guitar Jack, 1/4 inch unbalanced mono, Zin=1MΩ.
      • Output Guitar Jack, 1/4 inch unbalanced mono, Zout=0.1Ω.
    • Power supply:
      • Any supply from 9 to 12V. Standard 9V Boss connector works (center tip negative, the pedal takes 600mA)

     

    Arduino Audio Meter Review by BlitzCityDIY:

    Have a look to the Blitz City DIY review on the pedal:

     

    All the info at www.electrosmash.com/time-manipulator
    You can always contact us at info@electrosmash.com

    ]]>         pedalSHIELD MEGA – Guitar Pedal KIT https://www.electrosmash.com/shop/product/pedalshield-mega-kit/ https://www.electrosmash.com/shop/product/pedalshield-mega-kit/#comments Sat, 20 Oct 2018 19:56:50 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=551
  • High-quality PCB with plated pads.
  • The complete Bill of Materials.
  • Laser cut transparent cover.
  • Check the Downloads & Links tab for extra information.
  • Not included: tools like solder iron, pliers, USB/power cables, etc. nor Arduino MEGA Board.
    • ]]>     pedalSHIELD MEGA is a programmable Open Source & Open Hardware guitar pedal based on the Arduino MEGA / ADK boards. Guitarists, hackers, and programmers can program their own effects in C/C++. It is designed to be a platform to learn about digital signal processing, effects, and experiment without deep knowledge in electronics or programming.

    All the info at www.electrosmash.com/pedalshield-mega
    You can always contact us at info@electrosmash.com

    ]]>     https://www.electrosmash.com/shop/product/pedalshield-mega-kit/feed/ 1     pedalSHIELD MEGA – Guitar Pedal PCB https://www.electrosmash.com/shop/product/pedalshield-mega-pcb/ Sat, 20 Oct 2018 19:56:13 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=550
  • The PCB is 53x112mm and made of high-quality FR4 (1.6mm thickness).
  • It has 2 copper layers with silkscreen and soldermask with plated holes for easy soldering on both sides.
  • Check the Downloads & Links tab for extra information.
    • ]]>     pedalSHIELD MEGA is a programmable Open Source & Open Hardware guitar pedal based on the Arduino MEGA / ADK boards. Guitarists, hackers, and programmers can program their own effects in C/C++. It is designed to be a platform to learn about digital signal processing, effects, and experiment without deep knowledge in electronics or programming.

    All the info at www.electrosmash.com/pedalshield-mega
    You can always contact us at info@electrosmash.com

    ]]>         pedalSHIELD DUE – Guitar Pedal KIT https://www.electrosmash.com/shop/product/pedalshield-due-kit/ https://www.electrosmash.com/shop/product/pedalshield-due-kit/#comments Sat, 20 Oct 2018 19:55:20 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=549
  • High-quality PCB with plated pads.
  • The complete Bill of Materials.
  • Laser cut transparent cover.
  • Check the Downloads & Links tab for extra information.
  • Not included: tools like solder iron, pliers, USB/power cables, etc. nor Arduino DUE Board.
    • ]]>     pedalSHIELD DUE is a programmable Arduino Open Source & Open Hardware guitar pedal based on the Arduino DUE board. Guitarists, hackers, and programmers can program their own effects in C/C++ or download ready effects from the online library. It is designed to be a platform to learn about digital signal processing, effects, and experiment without deep knowledge in electronics or programming.

    All the info at www.electrosmash.com/pedalshield
    You can always contact us at info@electrosmash.com

    ]]>     https://www.electrosmash.com/shop/product/pedalshield-due-kit/feed/ 1     pedalSHIELD DUE – Guitar Pedal PCB https://www.electrosmash.com/shop/product/pedalshield-due-pcb/ Sat, 20 Oct 2018 19:54:45 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=548
  • The PCB is 53x101mm and made of high-quality FR4 (1.6mm thickness).
  • It has 2 copper layers with silkscreen and soldermask with plated holes for easy soldering on both sides.
  • Check the Downloads & Links tab for extra information.
    • ]]>     pedalSHIELD DUE is a programmable Arduino Open Source & Open Hardware guitar pedal based on the Arduino DUE board. Guitarists, hackers, and programmers can program their own effects in C/C++ or download ready effects from the online library. It is designed to be a platform to learn about digital signal processing, effects, and experiment without deep knowledge in electronics or programming.

    All the info at www.electrosmash.com/pedalshield
    You can always contact us at info@electrosmash.com

    ]]>         pedalSHIELD UNO – Guitar Pedal KIT https://www.electrosmash.com/shop/product/pedalshield-uno-kit/ https://www.electrosmash.com/shop/product/pedalshield-uno-kit/#comments Sat, 20 Oct 2018 19:53:47 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=547
  • High-quality PCB with plated pads.
  • The complete Bill of Materials.
  • Included the high-quality PCB and laser cut transparent cover.
  • Check the Downloads & Links tab for extra information.
  • Not included: tools like solder iron, pliers, USB/power cables, etc. nor Arduino UNO Board.
  • ]]>     pedalSHIELD UNO is programmable guitar pedal that works with the Arduino UNO / Genuino UNO Board. The project is Open Source & Open Hardware and aimed for guitarists, hackers, and programmers that want to learn about digital signal processing, effects, synthesizers and experiment without deep knowledge on DSP, electronics or hardcore programming.

    All the info at www.electrosmash.com/pedalshield-uno
    You can always contact us at info@electrosmash.com

    ]]>     https://www.electrosmash.com/shop/product/pedalshield-uno-kit/feed/ 3     pedalSHIELD UNO – Guitar Pedal PCB https://www.electrosmash.com/shop/product/pedalshield-uno-pcb/ Sat, 20 Oct 2018 19:50:52 +0000 https://fnz.93f.mywebsitetransfer.com/shop/?post_type=product&p=546
  • The PCB is 53x78mm and made of high-quality FR4 (1.6mm thickness).
  • It has 2 copper layers with silkscreen and soldermask with plated holes for easy soldering on both sides.
  • Check the Downloads & Links tab for extra information.
    • ]]>     pedalSHIELD UNO is programmable guitar pedal that works with the Arduino UNO / Genuino UNO Board. The project is Open Source & Open Hardware and aimed for guitarists, hackers, and programmers that want to learn about digital signal processing, effects, synthesizers and experiment without deep knowledge on DSP, electronics or hardcore programming.

    All the info at www.electrosmash.com/pedalshield-uno
    You can always contact us at info@electrosmash.com

    ]]>