Hey, I've bought the pedalShield for arduino uno, but i want to adapt it to Mega, because
i have a project for university for my last year which i have the pedal that changes the effects on guitar
but i have to also make it transfer data to a server, to to this it requires a modulator. The pedalShield is using all the pins
in arduino uno, so that's why i want to adapt it to MEGA so i could also connect the modulator. The problem is that there is no output for the sound PWM of the guitar
when the pedal is activated. I really need help with this please
The pedalShield is using all the pins in arduino uno, so that's why i want to adapt it to MEGA
pedalSHIELD UNO just uses few pins from the Arduino UNO board, are you trying to access some pin that is currently used? Which pins do you need to use?
The only pins that overlap with yours are the 12 and 13 (3PDT and LED), this resources are not fundamental for the pedalSHIELD, you can try as a test just to take a simple code (like clean or distortion) and just remove all the references to the LED and 3PDT in the code and mix it with your code.
The pedal should work because the LED and 3PDT wont stop it from functioning, and if it works you can just any other pins for the LED and 3PDT and do a simple hardware mod to the shield.