PCB transfer for the pedalShield Mega

6 years 5 months ago #1349 by Joshua2001
Hello, I would like to know where I can download the PCB transfer for the pedalShield Mega. Thank you
The following user(s) said Thank You: mfalmeida

Please Log in to join the conversation.

6 years 5 months ago #1350 by Ray
Hi, sure not problem! . This weekend we are away but on Tuesday I will post it. Please write us to info at electrosmash.com if you dont see the reply.
The following user(s) said Thank You: Joshua2001, mfalmeida

Please Log in to join the conversation.

6 years 1 week ago #1533 by Ray
These are the pedalSHIELD MEGA PCB transfers for DIY:

File Attachment:

File Name: pedalSHIEL...fers.zip
File Size:82 KB
Attachments:
The following user(s) said Thank You: mfalmeida

Please Log in to join the conversation.

5 years 9 months ago #1611 by mfalmeida
hi ray,
thanks for the pdf…

however by checking at the pcb selled on the site it looked that one of the prints should have been in "negative".

looks like the circuit will not be the same after etching….

can you check it out please...thanks

Please Log in to join the conversation.

5 years 9 months ago #1613 by Ray
Hi,
I mirrored the bottom side of the PCB on purpose in order to avoid that one of the sides is transferred wrong when you are doing DIY etching at home.

The ECad software representation "on the screen" is always a view from the top of the board, showing the bottom layer "through" the board. So if your bottom side looks like the screen, it's backward.

I am not sure which process are you using for doing this. if you are using the toner/transparent acetate you can just flip the sheet and if you still have problems I can upload a file without the mirrored bottom..
The following user(s) said Thank You: mfalmeida

Please Log in to join the conversation.

5 years 9 months ago #1614 by mfalmeida
thanks for your quick reply…
if you can upload the non mirrored file i´ll apreciate it very much.

i´m doing the toner transfer etching so i can´t flip the image.
Thanks a lot…
and
happy new year

Manu

Please Log in to join the conversation.

5 years 9 months ago #1626 by Ray

thanks for your quick reply…
if you can upload the non mirrored file i´ll apreciate it very much.

Find attached the files that you asked for, If you have any question just let us know!

File Attachment:

File Name: pedalSHIEL...rred.zip
File Size:82 KB
Attachments:
The following user(s) said Thank You: mfalmeida

Please Log in to join the conversation.

4 years 11 months ago #2013 by nfort
Hi everyone. I have a question here.
What kind of PCB should I use? Im goiging to use the toner/thermic method to get my PCB.
Im newbie with electronics, so I need help with this.
Single layer o double layer PCB?
Thanks

Please Log in to join the conversation.

4 years 11 months ago #2020 by Ray
the pedalshield mega is a double layer PCB

Please Log in to join the conversation.

4 years 9 months ago #2044 by jason568
Rooting an Android device is the most important thing users look for after installing an Official Firmware, or after purchasing a brand new device, however, most of the people don’t know that for the Firmware you can use any recent version of Super SU.zip and as far as the Custom Recovery is concerned, it is for the device, not the Android version, so it doesn’t matter which Android version you are using you can use the same recovery you used for the Older version and it will work without any problem.
androidswiki.com/

Please Log in to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio