Welcome, Guest
Username: Password: Remember me

TOPIC: Output impedance

Output impedance 3 months 3 weeks ago #642

  • brownt
  • brownt's Avatar
  • OFFLINE
  • New Member
  • Posts: 8
  • Thank you received: 1
  • Karma: 1
what is the output impedance of the first op-amp, at the input to A0, thanks.
The administrator has disabled public write access.

Output impedance 3 months 3 weeks ago #643

  • Ray
  • Ray's Avatar
  • OFFLINE
  • Administrator
  • Posts: 244
  • Thank you received: 52
  • Karma: 8
Hi,
Looking at the schematic:

www.electrosmash.com/images/tech/pedalsh...ld-uno-schematic.png
The output impedance at the A0 output is:
Zout= R6 + Zout of TL972

If you check the TL972 datasheet (www.ti.com/lit/ds/symlink/tl972.pdf) on page 8 Figure 5, the output impedance at 5V is less than 0.1 ohm, so the total Zout is:

Zout = R6(4.7K) + 01ohm = 4.7K

Meaning that the output impedance at pin A0 is determined by R6 (4.6K).
The administrator has disabled public write access.
Time to create page: 0.234 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio